Month: May 2021

If you need to print this PDF or save for later
click below to download your copy

[button size=”medium” style=”secondary” text=”Download PDF” link=”https://vetovationnew.instawp.xyz/wp-content/uploads/2021/01/Microsoft-PowerPoint-Maintenance-Slides-1.pdf” target=”none”]

 

Basic Maintenance STERLINK

Sterlink Gas Plasma Sterilizer (FPS-15sp)

12 Month Maintenance

• Change your filters and oil every 12 months, or when indicated by color.
• Use Sterlink Maintenance Kits to change Sterlink Kit filters and oils for Sterlink Sterilization Kits —Available for purchase from VetOvation.
• If you have any issues, send an email to VetOvation: Garrett@vetovation.com

 

Maintenance Kits

Filters & Oil Change

Filter Kit:

A. HEPA Filter

B. Chamber Filter

C. Ozon Filter (Two hand knobs)

D. VC Cartridge

 

Oil Kit:

A. New oil injection silicon adapter (white)

B. New oil injection syringe

C. New oil bottle

D. New oil injection tube (transparent)

E. Extracted oil injection silicon adapter (black)

F. Extracted oil syringe

G. Extracted oil bottle

H. Waste oil extraction tube (black)

 

Oil Replacement Sterlink Sterilization Kit

A. New oil injection silicon adapter (white)

B. New oil injection syringe

C. New oil bottle

D. New oil injection tube (transparent)

E. Extracted oil injection silicon adapter (black)

F. Extracted oil syringe

G. Extracted oil bottle

H. Waste oil extraction tube (black)

 

Oil Change Using Oil Replacement Kit

This is the oil changing kit containing 2 syringe, 2 tube, 2 tube connector, 1 oil, 1 empty bottle.

Assemble the rubber with the tube. After that, connect it to the syringe.

With your black tube, connect it to the bottom blue hold from the unit.

After the tube is fully connected, slowly pull out the oil from the unit.

With the empty bottle, remove the tap.

Pick up the black tube syringe and push to put the old oil inside the bottle.

Repeat this until all the oil from the bottle is empty.

With a white tube syringe, take out the new oil from the bottle.

The oil gauge should be slightly higher from the center, just like the picture.

 

Filter Replacement Sterlink Kit

A. HEPA Filter

B. Chamber Filter

C. Ozon Filter (Two hand knobs)

D. VC Cartridge

 

Filter Change Using Filter Replacement Kit

Changing HEPA Filter

1. Take out the new HEPA filter

2. Remove the old HEPA filter by turning counterclockwise.

3. Replace it with new HEPA filter by turning clockwise

Changing Ozone Filter

1. Ozone filter can be found on the left side of the product.

2. Remove the knobs

3. Remove the Ozone filter and replace it with new Ozone filter

 

STERLINK Oil Replacement Kit

[table id=3 /]

STERLINK Filter Replacement Kit

[table id=4 /]